BDS
Lubricants
German-made cutting oils, coolants and pastes developed for magnetic drills and annular cutters. They cut heat and friction, extending tool life and improving hole quality.
Products
- Coolant BDS 6000-1 LitreIdeal for TCT core drillsMABZHB1
- Heavy-Duty Cutting Oil 1X400Ml .Heavy-duty cutting oil for demanding drillingMABZHS400
- High-Performance Adhesive Grease BDS5200 - 6 x 400 mlSpray format — for on-site and maintenance workMABZHS406
- Heavy-Duty Cutting Oil 400 MlHeavy-duty cutting oil for demanding drillingMABZHS412
- Coolant BDS 5000-5 LitreIdeal for HSS core drills — 5 L economy sizeMABZHS5
- Kesme Macunu Bds 5500 - 1000 GCutting paste for twist drills and tapsMABZHS550
- Yüksek Teknolojili Kesme Macunu BDS 7500 - 85GNon-drip paste for overhead and vertical drillingMABZHS570
- Yüksek Teknolojili Kesme Macunu BDS 7500 - 12 x 85 gNon-drip paste for overhead work — box of 12MABZHS572
- Coolant BDS 5000-1 LitreIdeal for HSS core drillsMABZHS6
Advantages
Longer Tool Life
Optimal cooling and reduced friction slow down cutting-edge wear, noticeably increasing holes per cutter.
Higher Cutting Performance
Smoother drilling, higher feed rates and efficient chip evacuation mean more work per shift.
Better Hole Quality
Dimensional accuracy is maintained, surfaces stay clean and burr formation is reduced.
Thermal Protection
Heat is carried away effectively, protecting both the cutter and the workpiece from overheating.
Products
Features
- Suitable for all HSS and TCT annular cutters
- Water-soluble and oil-based formulations
- Non-drip paste and grease for vertical and overhead drilling
- Spray format for fast on-site and maintenance use
- Compatible with integrated coolant tanks of magnetic drills
- Improves chip evacuation and leaves a clean hole surface
- Made in Germany, formulated for industrial duty
In core drilling, tool life is not decided by the cutter alone — it is decided by the heat at the cutting edge. The BDS lubricant range addresses exactly that: low-viscosity cutting oil for HSS cutters, high heat-capacity coolant for TCT cutters, and non-drip pastes and sprays for vertical and overhead work. All of them are compatible with the integrated coolant tanks of magnetic drilling machines, so no extra equipment is needed. Choosing the right lubricant can double the number of holes per cutter and leaves a cleaner hole surface through better chip evacuation.
Compatible Machines
The machines this accessory is recommended for. Pick one to open its page.
- AirMAB 5000
- AutoMAB 350
- AutoMAB 450
- eRailMAB 450
- MAB 100 K
- MAB 1300
- MAB 1300 V
- MAB 155
- MAB 455
- MAB 455 SB
- MAB 465
- MAB 485
- MAB 485 SB
- MAB 525
- MAB 525 SB
- MAB 815
- MAB 825
- MAB 825 KTS
- MAB 825 V
- MAB 845
- MAB 845 V
- MABasic 200
- MABasic 35
- MABasic 40
- MABasic 400
- MABasic 450
- MABasic 50
- MABasic 850
- PipeMAB 200
- PipeMAB 525
- PipeMAB 825
- RailMAB 915
- RailMAB 965
Would you like help choosing the right model?
Let our specialists pick the BDS model that fits your application and prepare a quote.