REEDMachines and Pumps for Plumbing
Hammer Flaring Tool for Copper Pipe
1 / 2
Hammer Flaring Tool for Copper Pipe
REED
Option4 options
Features
- Suited for flaring Type K copper tubing with water in the service line.
- Make 45-degree flares with pressure relieving hammer flaring tools for copper tubing.
- Hardened and tempered to resist wear.
Hammer Flaring Tool for Copper Pipe
Specifications / Models
Same on all:Countersink Angle 45deg
| Stock Code | Description | Width | Height | Where Used | Overall Length | Copper Tube Size |
|---|---|---|---|---|---|---|
| REED-06071 | Hammer Flaring Tool, 45 deg Flare | 1-3/8in | 1in | 3/4 in Copper Tube | 4-1/2in | 3/4” |
| REED-06072 | Hammer Flaring Tool, 45 deg Flare | 1-1/2in | 1-1/2in | 1 in Copper Tube | 4-1/2in | 1" |
| REED-06077 | Hammer Flaring Tool, 45 deg Flare | 2-1/2in | 2-1/2in | 1-1/2 in Copper Tube | 4-3/4in | 1 1/2” |
| REED-06078 | Hammer Flaring Tool, 45 deg Flare | 3in | 3in | 2 in Copper Tube | 4-3/4in | 2" |
Product Description
With precision channels drilled from the tool’s end to its side, Pressure-Relieving Hammer Flares allow flaring even when water is in the service line. Use only on Type K soft copper water service tubing. To absorb impact shock on striking, it is recommended to only strike the flaring tool with a soft-faced brass hammer like REED's HAM3.
Additional Documents
Additional sources
The manufacturer's own documents. Most are in English or German.
Industries this machine is used in
The industry page gathers that trade's machines, consumables and our references in one place.
