Внутренний труборез IC1S КОД ТОВАРА 04501 IC3/4S КОД ТОВАРА 04506
- Пильное полотно
- Агрессивно режет пластиковую трубу и режет дерево
- для крепёжных проушин мойки.
- УКАЗАНИЯ:
- 1. Наденьте защитные очки или щиток на всё лицо.
- 2. Вставьте резак в патрон дрели и надёжно затяните.
- 3. НЕ работайте в реверсе. Вращение только вперёд.
- 4. Введите полотно в отрезаемую трубу. Нажмите на курок
- дрели, чтобы начать рез. Дайте полотну пройти полностью
- через стенку трубы. Держите дрель прямо, под
- прямым углом к трубе. Проверните на 360°, чтобы завершить рез.
- 5. Не допускайте контакта полотна с бетоном и другими твёрдыми
- предметами — это сокращает срок службы полотна.
- 6. При чрезмерном износе или повреждении полотна
- немедленно замените его.
Reed Manufacturing Company 1425 West 8th St., Erie, PA 16502 USA Phone: 800-666-3691 or 814-452-3691 Fax: 800-456-1697 or 814-455-1697
- Запасные полотна
- ОПИСАНИЕ
- КОД ТОВАРА МИН. ВНУТР. ДИАМЕТР КОЛ-ВО
- Пильные полотна 04503
- 1 1/4”
- 2/pk.
- 04508
- 3/4”
- 2/pk.
- Абразивные полотна
- 04502
- 1 1/2”
- 5/pk.
- Абразивные полотна предпочтительны при контакте с бетоном
- или другими твёрдыми поверхностями
810-54506
Внутренний труборез IC1S КОД ТОВАРА 04501 IC3/4S КОД ТОВАРА 04506
- Пильное полотно
- Cuts plastic pipe aggressively and cuts wood
- for sink lugs.
- INSTRUCTIONS:
- 1. Wear safety glasses or full face protective gear.
- 2. Insert cutter into drill chuck and tighten securely.
- 3. DO NOT operate in reverse. Run drill forward only.
- 4. Insert blade into pipe to be cut off. Squeeze drill
- trigger to begin cut. Let blade penetrate completely
- through pipe wall. Be sure to hold drill straight at
- right-angle to pipe. Rotate 360° to complete cut.
- 5. Avoid blade contact with concrete or other hard
- objects as this will shorten blade life.
- 6. If excessive wear or damage occurs to the blade,
- replace immediately.
Reed Manufacturing Company 1425 West 8th St., Erie, PA 16502 USA Phone: 800-666-3691 or 814-452-3691 Fax: 800-456-1697 or 814-455-1697
- Replacement Blades
- DESCRIPTION
- ITEM CODE I.D MINIMUM QTY.
- Saw Tooth Blades 04503
- 1 1/4”
- 2/pk.
- 04508
- 3/4”
- 2/pk.
- Abrasive Blades
- 04502
- 1 1/2”
- 5/pk.
- Abrasive blades preferable for contact with concrete
- or other hard surfaces
810-54506
Внутренний труборез IC1S КОД ТОВАРА 04501 IC3/4S КОД ТОВАРА 04506
- Saw tooth blade
- Cuts plastic pipe aggressively and cuts wood
- for sink lugs.
- INSTRUCTIONS:
- 1. Wear safety glasses or full face protective gear.
- 2. Insert cutter into drill chuck and tighten securely.
- 3. DO NOT operate in reverse. Run drill forward only.
- 4. Insert blade into pipe to be cut off. Squeeze drill
- trigger to begin cut. Let blade penetrate completely
- through pipe wall. Be sure to hold drill straight at
- right-angle to pipe. Rotate 360° to complete cut.
- 5. Avoid blade contact with concrete or other hard
- objects as this will shorten blade life.
- 6. If excessive wear or damage occurs to the blade,
- replace immediately.
Reed Manufacturing Company 1425 West 8th St., Erie, PA 16502 USA Phone: 800-666-3691 or 814-452-3691 Fax: 800-456-1697 or 814-455-1697
- Replacement Blades
- DESCRIPTION
- ITEM CODE I.D MINIMUM QTY.
- Saw Tooth Blades 04503
- 1 1/4”
- 2/pk.
- 04508
- 3/4”
- 2/pk.
- Abrasive Blades
- 04502
- 1 1/2”
- 5/pk.
- Abrasive blades preferable for contact with concrete
- or other hard surfaces
810-54506
Внутренний труборез IC1S КОД ТОВАРА 04501 IC3/4S КОД ТОВАРА 04506
- Saw tooth blade
- Cuts plastic pipe aggressively and cuts wood
- for sink lugs.
- INSTRUCTIONS:
- 1. Wear safety glasses or full face protective gear.
- 2. Insert cutter into drill chuck and tighten securely.
- 3. DO NOT operate in reverse. Run drill forward only.
- 4. Insert blade into pipe to be cut off. Squeeze drill
- trigger to begin cut. Let blade penetrate completely
- through pipe wall. Be sure to hold drill straight at
- right-angle to pipe. Rotate 360° to complete cut.
- 5. Avoid blade contact with concrete or other hard
- objects as this will shorten blade life.
- 6. If excessive wear or damage occurs to the blade,
- replace immediately.
Reed Manufacturing Company 1425 West 8th St., Erie, PA 16502 USA Phone: 800-666-3691 or 814-452-3691 Fax: 800-456-1697 or 814-455-1697
- Replacement Blades
- DESCRIPTION
- ITEM CODE I.D MINIMUM QTY.
- Saw Tooth Blades 04503
- 1 1/4”
- 2/pk.
- 04508
- 3/4”
- 2/pk.
- Abrasive Blades
- 04502
- 1 1/2”
- 5/pk.
- Abrasive blades preferable for contact with concrete
- or other hard surfaces
810-54506
Внутренний труборез IC1S КОД ТОВАРА 04501 IC3/4S КОД ТОВАРА 04506
- Saw tooth blade
- Cuts plastic pipe aggressively and cuts wood
- for sink lugs.
- INSTRUCTIONS:
- 1. Wear safety glasses or full face protective gear.
- 2. Insert cutter into drill chuck and tighten securely.
- 3. DO NOT operate in reverse. Run drill forward only.
- 4. Insert blade into pipe to be cut off. Squeeze drill
- trigger to begin cut. Let blade penetrate completely
- through pipe wall. Be sure to hold drill straight at
- right-angle to pipe. Rotate 360° to complete cut.
- 5. Avoid blade contact with concrete or other hard
- objects as this will shorten blade life.
- 6. If excessive wear or damage occurs to the blade,
- replace immediately.
Reed Manufacturing Company 1425 West 8th St., Erie, PA 16502 USA Phone: 800-666-3691 or 814-452-3691 Fax: 800-456-1697 or 814-455-1697
- Replacement Blades
- DESCRIPTION
- ITEM CODE I.D MINIMUM QTY.
- Saw Tooth Blades 04503
- 1 1/4”
- 2/pk.
- 04508
- 3/4”
- 2/pk.
- Abrasive Blades
- 04502
- 1 1/2”
- 5/pk.
- Abrasive blades preferable for contact with concrete
- or other hard surfaces
810-54506
Внутренний труборез IC1S КОД ТОВАРА 04501 IC3/4S КОД ТОВАРА 04506
- Saw tooth blade
- Cuts plastic pipe aggressively and cuts wood
- for sink lugs.
- INSTRUCTIONS:
- 1. Wear safety glasses or full face protective gear.
- 2. Insert cutter into drill chuck and tighten securely.
- 3. DO NOT operate in reverse. Run drill forward only.
- 4. Insert blade into pipe to be cut off. Squeeze drill
- trigger to begin cut. Let blade penetrate completely
- through pipe wall. Be sure to hold drill straight at
- right-angle to pipe. Rotate 360° to complete cut.
- 5. Avoid blade contact with concrete or other hard
- objects as this will shorten blade life.
- 6. If excessive wear or damage occurs to the blade,
- replace immediately.
Reed Manufacturing Company 1425 West 8th St., Erie, PA 16502 USA Phone: 800-666-3691 or 814-452-3691 Fax: 800-456-1697 or 814-455-1697
- Replacement Blades
- DESCRIPTION
- ITEM CODE I.D MINIMUM QTY.
- Saw Tooth Blades 04503
- 1 1/4”
- 2/pk.
- 04508
- 3/4”
- 2/pk.
- Abrasive Blades
- 04502
- 1 1/2”
- 5/pk.
- Abrasive blades preferable for contact with concrete
- or other hard surfaces
810-54506