Hot Forming Presses
Features
- From a single press up to intelligent solutions for central line control.
- Customized solutions for special hot forming applications.
- Years of experience in press design.
- Unique solutions in the field of smart process analysis.
Hot Forming Presses
Specifications / Models
Machine concepts
On the basis of the following machine concepts we find the optimum solution for you:
The 4-column press is perfectly suitable for the integration into a hot forming line. Upper and lower traverse are connected by means of pre-tensioned tie rods. This design offers comprehensive advantages: on the one hand the press frame is very solid and offers an optimum deflection compensation. On the other hand, this design allows easy access to the tool area for the operator from all four sides. Therefore, the components can also be processed automatically without any problems. 4-column presses are used for a wide range of application. They are standardized for closing forces of 630, 800, 1,000, 1,200, 1,500, 1,700, 2,000, 2,500, 3,500 and 5,000 tons.
An optimum forming process is also depending on a perfect interaction of operator and machine. For this purpose, the visualization system PressPro® has been developed. With the aid of PressPro®, the operator can develop, optimize and execute the forming process independently. The open and flexible system allows freely definable process steps for prototyping as well as for series production. Pre-defined sequences can be assigned to each tool, saved in the corresponding tool data base and accessed from there as well. Main advantage: The time between the tool set-up and the production of the first "good" part can be reduced significantly.
For an optimum control of the highly complex process sequence we have been working successfully with our partner Bosch Rexroth for many years. Based on the Motion Logic System Indra-Motion MLC, Rexroth has developed a completely new control and feedback control system which has been tested exclusively in our Prototyping Center and continuously refined later on from both partners. The entire control system for hydraulic, electric and hybrid drives builds on a compact controller-based hardware. Here the PLC merges with the motion controller to a new system.
Source: the manufacturer's product page
Product Description
From a single press to intelligent solutions for centralised line control: we develop tailor-made solutions for your special applications in hot forming. Our many years of experience in press design and our unique solutions in the field of intelligent process analysis provide a decisive competitive advantage.
Additional Documents
Datasheets
Industries this machine is used in
The industry page gathers that trade's machines, consumables and our references in one place.
