Bipolar Plate Forming — Hydroforming Presses

As a pioneer in hydroforming, we deliberately rely on the process for which we are known worldwide as experts for the production of (bipolar) plates. The advantages of hydroforming are obvious:

Hydroforming – or external high-pressure forming – is an active media forming process. A metal foil is inserted into a tool gravure and expanded into the forming tool with very high pressure by means of a water-oil-emulsion (see sketch).

Thanks to the even pressure distribution over the entire foil surface, an homogeneous material thickness distribution is achieved, and abrupt stress transitions are avoided. This allows forming even the smallest radii. The material spring back remains low.

With so-called external high-pressure forming, extremely filigree structures can be realized in series using extremely thin materials from 25 μm. In contrast to mechanical forming, which at first glance may seem more cost-effective, especially for series production, hydroforming offers numerous advantages that pay off in the long term.

Since plate production for fuel cells and electrolyzers is all about repeatable precision, attention to detail and high value, hydroforming is the optimal process – and one of the quality features that make Graebener® your sustainable competitive edge.

• Criteria: Graebener® hydroforming
• Repeat accuracy in the process: Very high
• Elasticity after forming: Highly elastic through gentle forming with integrated cooling
• Wall thickness variation: Very homogeneous over the entire duct cross- section
• Suitability for pre-coated materials: Ideal: no friction on the water side
• Contact areas: Almost ideal shaping of the flat contact surfaces
• Use of different material thicknesses in one tool: Flexible: different material thicknesses can be used per tool
• Adaptation of the manufacturing parameters in the forming process: Flexible
• Tool costs: Low: less wear and fewer tools
• Number of tool stages: One

Foil thickness: 100 μm, Material: Alleima Sanergy® LT (316L)

Foil thickness: 50 μm, Material: 304L

Foil thickness: 100 μm, Material: Titanium Grade 1