GBCAutomatic Plate Bevelling Machine

GBC-COMPACT EDGE

Milling Head Diameter: Ø50 mm
Plate Thickness Capacity: 6-60 mm
Plate Thickness Capacity (GBC): 6 - 60 mm
Max. Cross Bevel Length (mm): 50 mm

1 / 7

GBC-COMPACT EDGE

Features

RANGE: Plates from 6 to 60 mm thickness (1/4” to 2 3/8”).
FUNCTIONS: Bevel from 15° to 60°.
MATERIALS: Carbon steel, stainless steel, duplex, super duplex, inconel, aluminium, etc.
POWER: Electric 3 phase 400V 50Hz.
CONFIGURATIONS: Standard and special.
OPTIONAL: Speed regulator.

GBC-COMPACT EDGE

+90 212 320 78 00

Technical Brochure

Specifications / Models

Unit

Stock CodeGBC-03-400-100-10004 COMPACT EDGE (Electric)

Specifications
Speed	820 rpm (ops. 350–820)
Power	4000 Watt
Voltage	230 V / 400 V
Weight	205,00 kg
Motor Type	Electric
Material Type	Carbon Steel / Stainless Steel (Inox) / Aluminium
Milling Head	Ø80 mm, 9 uç
Feed Rate	0 – 1,5 m/dak
Milling Head Diameter	Ø50 mm
Bevel Angle	15° – 60°
Plate Thickness Capacity	6-60 mm
Max. Bevel Depth (mm)	43,30 mm
Plate Thickness Capacity (GBC)	6 - 60 mm
Recommended Plate Thickness Range	6 – 60 mm
Max. Cross Bevel Length (mm)	50 mm

Product Description

Plate beveling machine Compact EDGE, features a high speed milling head with interchangeable inserts, is a machine with reduced structural dimensions and weight for a more flexible and dynamic use.

The machine is equipped with a stepless variable head type which allows bevel angles from 15° to 60°, granting a very easy and quick adjustment of the angle of bevel.

The plate beveling machine Compact Edge is equipped with a plate detecting sensor and trolley with a new chips conveyance system. We have also implemented a dual amortization system which allows to overcome eventual imperfections of the wall thickness or eventual variations of the plate, as well as the imperfections of the ground.

More information

The Compact Edge sheet metal beveller is widely used in workshops and heavy carpentry, for thick metal plates and also in the naval sector. Thanks to its structure, the plate beveling machine can be used in two different configurations:

“standard” configuration: using the integrated trolley;
“special” configuration: removing the machine head from the trolley and applying it directly to the edge of the sheet metal.

This plate beveling machine drive unit has been completely renewed, optimizing its dimensions and significantly increasing the quality of motion transmission via a single motor.

The Compact Edge plate beveler series can be equipped with a speed variator. This device, to be considered an optional accessory, can be installed directly on board the beveling machine at the time of purchase or subsequently through a simple connection operation using a multi-connector.

The speed variator allows you to work, with excellent results in terms of quality and productivity, different types of materials, even the most tenacious.

Intuitive and extremely easy to use via the digital display, the new device allows you to vary the speed of the cutter from 300 rpm to 820 rpm. The parameters can be set before processing, if the characteristics of the material are known, or varied during work in order to identify the optimal adjustment.

Technical BrochureOur own document