GBC-CHALLENGE
- Plate Thickness Capacity (GBC)
- 6 - 40 mm
- Max. Cross Bevel Length (mm)
- 12 mm / 22,63 mm
- Max. Bevel Depth (mm)
- 10,0 mm / 15,0 mm
- Motor Type
- Electric
Features
- The plate beveling machines of the Challenge series travel along the plate edge automatically, without operator intervention.
- Available in three models: Challenge 12, Challenge 15 and Challenge 15 Reverse.
- Challenge 12: compact, fixed-head design for high portability around the working area.
GBC-CHALLENGE
Specifications / Models
Same on all:Motor Type Electric·Bevel Angle 22,5° – 55°·Plate Thickness Capacity (GBC) 6 - 40 mm·Recommended Plate Thickness Range 6 – 40 mm
| Stock Code | Description | Model | Max. Bevel Depth (mm) | Max. Cross Bevel Length (mm) | Working Direction |
|---|---|---|---|---|---|
| GBC-03-150-100-10000 | CHALLENGE GBC-CH12 (Electric) | GBC-CH12 | 10,0 mm | 12 mm | — |
| GBC-03-200-200-10000 | CHALLENGE GBC-CH15 REVERSE (Electric) | GBC-CH15 REVERSE | 15,0 mm | 22,63 mm | Underside of the plate |
| GBC-C11650/00 | CHALLENGE GBC-CH15 (Electric) | GBC-CH15 | 15,0 mm | 22,63 mm | — |
Product Description
The plate beveling machine of the Challenge series, once positioned on the plate edge, travels along the plate automatically, without any intervention by the operator.
The plate beveling machines Challenge are available in three different models:
Plate beveling machine Challenge 12
Plate beveling machine with compact design to meet high portability demand all around working area. The machine is fixed head type which allow bevel angle according with roller assembly skid mounted only.
The assembly skid available are: 30° (standard), 22°30′, 25°, 35°, 37°30′, 45° and 55° and all can be replaced in less than one minute.
The maximum diagonal achievable is 12 mm.
Plate beveling machine Challenge 15
Plate beveling machine suitable for larege plates as well as small strips.
The machine is a variable head type, that allows to change the bevel angle in few minutes without any additional accessory.
The maximum diagonal achievable is 15 mm.
Plate beveling machine Challenge 15 U
Plate beveling machine is able to work on the lower side of the plate. It is the upside down version of the Challenge 15.
The maximum diagonal achievable is 15 mm.
Machine features
Our Challege plate beveling machines are used in shop carpentry and less restrictive environments, with lower bevel requirements. They don’t produce sparks and are very suitable for straps.
Contact us if you are interested in the Challenge series metal bevellers or would like to receive a free quote.
Additional Documents
Datasheets
Videos
Similar Products
Ordered by capacity: Max. Bevel Depth (mm). Smallest first.
- GBC-CHALLENGEYou are viewing this15,0 mm
- GBC-COMPACT EDGE REVERSE38,64 mm
- GBC-COMPACT EDGE43,30 mm
- GBC-BASIC EDGE 5045,98 mm
- GBC-EDGE 8073,57 mm
- GBC-EDGE 80 REVERSE73,57 mm
You may also be interested in
What the manufacturer shows alongside this on its own product page.
Industries this machine is used in
The industry page gathers that trade's machines, consumables and our references in one place.