Habib Makina — the single address in steel plate and pipe processing
Use the up and down arrow keys to move through the suggestions, Enter to choose, Escape to close.
Past Campaigns

Service Equipment Campaign

Service Equipment Campaign
Sealey Power Products and Omega Hydraulic Equipment service equipment has been imported and added to our stock.

Omega Hydraulic Equipment

Hydraulic Straightening Set - Omega 50040 Hydraulic Straightening Set - Omega 50100

Sealey Power Products





























Jump Starter - Sealey RS 102 Hydraulic Coil Spring Compressor - Sealey RE 231 / 232
Technical specifications
  • Cable and clamp length 1 m
  • LED battery and charge indicators
  • The unit also has a standard cigarette-lighter socket, so it can run another 12 V product
  • Supplied with a mains charger and a twin-plug adapter for charging in the vehicle

 Technical specifications

  • Operated by a 1500 kg capacity foot-pedal hydraulic unit
  • Plastic-coated clamps keep the risk of damaging the springs low.
  • Suitable for use on springs from Ø102 mm up to Ø160 mm.
Brake and Clutch Bleeding Tool - Sealey VS 820 20-Piece Cleaning & Decarbonising Brush Set - Sealey VS 1800
Technical specifications:

  • A professional one-man brake and clutch bleeding tool
  • Requires no external power source — simply fill and pump.
  • Holds 2.5 litres of hydraulic fluid and fills the whole system in one go with no risk of running the reservoir dry.
  • The pressure range is suitable for use on ABS systems

 Technical specifications:

  • Ideal for cleaning and decarbonising hard-to-reach places such as glow plug and injector bores, especially before refitting.
  • Offered in brass, nylon and steel designs in diameters from 9 to 19 mm.
  • Quick-release extension bar for wider reach
Oil Drain Plug Thread Repair Set - Sealey VS 660
Technical specifications:

  • For repairing the threads of sump, gearbox and differential plugs
  • Opens up the damaged thread slightly, after which a new drain plug and washer are fitted.
  • Tap sizes M13, M15, M17, M20

All articlesRequest a Quote

Latest Articles

Cutter Selection Guide: Tool Material, Geometry and Thickness

Cutter Selection Guide: Tool Material, Geometry and Thickness

Read more
Technical Standards in Industrial Pipe Processing and Weld Preparation: GBC SpA Solutions

Technical Standards in Industrial Pipe Processing and Weld Preparation: GBC SpA Solutions

Read more
German Engineering in Magnetic Drilling: A BDS Maschinen Technical Analysis Guide

German Engineering in Magnetic Drilling: A BDS Maschinen Technical Analysis Guide

Read more