The Key to a Leak-Tight Network: A Flawless Bevel with the REED BEVEL BOSS®
Why bevelling should be done professionally
One of the most common mistakes on site is bevelling by hand or with a standard grinding wheel. That method leaves irregular surfaces, burrs and wrong angles on the pipe end. A poorly prepared pipe end damages the sealing ring during jointing and causes the line to leak from its very first day. The REED BEVEL BOSS® removes these risks and gives factory-quality results within seconds.
The standout features of REED BEVEL BOSS® technology
The system is a special mechanism that fits easily onto standard angle grinders. By minimising dependence on the operator's physical strength or manual skill, it guarantees the same standard angle and smoothness on every cut.
REED BEVEL BOSS® advantages
- High speed: Saves up to 80% of the time taken by standard methods.
- Broad compatibility: Gives excellent results on PVC, CPVC, ABS, PVCO and many other plastic pipe types.
- Faultless angle: Creates the ideal angle to protect the gasket, whatever the pipe wall thickness.
- Clean working: Keeps dust and burrs to a minimum so that chemical solvent cement adheres fully to the surface.
Seismic assurance for an earthquake country
During an earthquake, underground pipelines come under great strain. If the bevel was not cut correctly, the gasket can slip under that strain and the line can go out of service. Habib Makina's field experience shows that lines prepared with the REED BEVEL BOSS® are far more resistant to seismic movement.
Sector applications
The technology is used not only on drinking water lines but also in chemical plants, wastewater management and critical infrastructure projects such as the Akkuyu Nuclear Power Plant. Through 15 years as REED distributor, Habib Makina has brought this equipment to major projects across Turkey and raised the quality of workmanship.
Frequently asked questions
1. Which brands of grinder is the REED BEVEL BOSS® compatible with?
It fits easily onto most standard 4.5 inch (115 mm) or 5 inch (125 mm) angle grinders.
2. What about blade life and replacement?
The blades are made from long-life carbide, and when they wear, spare parts can be supplied quickly from Habib Makina stock.
3. Is it used only on straight pipe?
Yes, it is designed for bevelling pipe ends, but it still gives the operator freedom of movement even in confined spaces.
4. Is training required?
It is very simple to use; the Habib Makina technical team provides on-site support for setting the tool up and using it efficiently.
