BEVELTOOLS
BEVELLING TIPS FOR STAINLESS STEEL
Beveltools cutter heads for bevelling stainless steel. Replaceable heads for the Bevel Mate, Bevel Mite and Mini Mite machines, in 30°, 37.5° and 45° angles and R2 to R6 radii, cutting 6 to 10 mm of bevel depth.
Products
- For Bevel Mite INOX - R3 - 6mm Bevelling Cutter (IN)Bevel Mite R3 radius — 6 mm depthBEVEL-7101050
- For Bevel Mite INOX - R2 - 6mm Bevelling Cutter (IN)Bevel Mite R2 radius — 6 mm depthBEVEL-7101150
- For Bevel Mite INOX - 45 ° - 6mm Bevelling Cutter (IN)Bevel Mite 45° — 6 mm plate bevelBEVEL-7102050
- For Bevel Mite INOX - 30 ° - 6mm Bevelling Cutter (IN)Bevel Mite 30° — narrow prep, 6 mmBEVEL-7104050
- For Bevel Mate INOX - R3 - 8mm Bevelling Cutter (IN)Bevel Mate R3 radius — 8 mm depthBEVEL-7201050
- For Bevel Mate INOX - R2 - 8mm Bevelling Cutter (IN)Bevel Mate R2 radius — 8 mm depthBEVEL-7201150
- For Bevel Mate INOX - R4 - 8mm Bevelling Cutter (IN)Bevel Mate R4 radius — 8 mm depthBEVEL-7201250
- For Bevel Mate INOX - R6 - 10mm Bevelling Cutter (IN)Bevel Mate R6 radius — 10 mm depthBEVEL-7201450
- For Bevel Mate INOX - 45 ° - 8mm Bevelling Cutter (IN)Bevel Mate 45° — 8 mm plate bevelBEVEL-7202050
- For Bevel Mate INOX - 37 ° - 8mm Bevelling Cutter (IN)Bevel Mate 37.5° — 75° V prepBEVEL-7203050
- For Bevel Mate INOX - 30 ° - 8mm Bevelling Cutter (IN)Bevel Mate 30° — narrow prep, 8 mmBEVEL-7204050
Specifications
| Radius | R3 · R2 · R4 · R6 |
|---|---|
| Material Type | Stainless Steel (Inox) |
| Compatible Machine | EBI 3.0 / ABIS-R 3.0 / ABIS-B 3.0 / EBI INOX / ABIS INOX / TEBİ 4.0 · EBA 3.0 / ABA 3.0 / EBA 4.0 / BEBA 4.0 / EBA INOX / TopEdge |
| Bevel Depth (mm) | 6 mm · 8 mm · 10 mm |
| Bevel Angle | 45° · 30° · 37,5° |
Advantages
Made For Stainless
These heads are supplied specifically for stainless, so they keep cutting in work-hardening material instead of blunting early.
Angle Or Radius
30°, 37.5° and 45° straight bevels plus R2 to R6 radii — the weld prep is set by which head you fit.
Low Cost Per Metre
A blunt head comes off and a fresh one goes on with the machine still on site, keeping running cost per metre down.
Depth Picks The Machine
Bevel Mite gives 6 mm, Bevel Mate 8 mm and the R6 head 10 mm; the prep depth you need decides the machine.
Products
Features
- Cutter heads supplied specifically for stainless steel
- Fit the Bevel Mate, Bevel Mite and Mini Mite machines
- Angles: 30°, 37.5° and 45°
- Radii: R2, R3, R4 and R6
- Bevel depth: 6 mm on Bevel Mite, 8 mm on Bevel Mate, 10 mm with R6
- Replaceable heads — low running cost per metre
- The head fitted sets the machine's maximum bevel width
Bevelling stainless calls for a different cutter than carbon steel: stainless work-hardens as you cut, and an edge with the wrong geometry goes blunt fast. The Beveltools INOX range is supplied specifically for this material and fits the Bevel Mate, Bevel Mite and Mini Mite machines. Specifying one is two steps. First the machine and the depth: Bevel Mite heads cut 6 mm of bevel, Bevel Mate heads cut 8 mm, and the R6 head takes that to 10 mm. Then the geometry. Angled heads cut a straight bevel — 30°, 37.5° and 45°. Two 37.5° faces meeting across a joint form a 75° V prep; 45° is the common standard for general plate work; 30° gives a narrower prep, which means less filler metal and less arc time. Radius heads (R2, R3, R4, R6) are for edge rounding and J-type preps, and as the radius grows so does the material removed and the power the machine has to supply. Because the heads are replaceable, a blunt one comes off and a fresh one goes on with the machine still on site, keeping the running cost per metre low. The head you fit also sets the maximum bevel width the machine can produce.
Compatible Machines
The machines this accessory is recommended for. Pick one to open its page.
Would you like help choosing the right model?
Let our specialists pick the BEVELTOOLS model that fits your application and prepare a quote.