| TECHNICAL CHARACTERI | ST | ICS MINI K LEVER MINI K BATTERY | ||||
| PNEUMATIC | ELECTRIC | BATTERY | ||||
| Tube machining range by mm outside diameter | 20 - 42 20 - 42 20 - 42 | |||||
| No-load rotation speed | min-1 | 180 | 305 | 151 | ||
| Torque (at Nm air line pressure) | 6 (0,6 MPa) 17 30 18 (0,8 MPa) | |||||
| Axial feed length | mm | 20 | 20 (0.78) | 23 (0.90) | ||
| Pneumatic drive power W | 435 | |||||
| Air consumption | l/min | 615 | ||||
| Air line pressure MPa | 0,6 ÷ 0,8 | |||||
| Quick coupling | inch | 1/2” | ||||
| Electric drive power W | 720 720 | |||||
| Supply voltage / charger | V | 230 | 18 / 230 | |||
| Mains frequency, incl. Hz charger | 50 | |||||
| Maximum noise level | dB | 75 | 75 | 75 | ||
| Weight kg | 4,8 5,5 5,7 |
[ 8 ]
Machinable inside diameter 20 - 42 mm
This compact hand-held facing and bevelling machine is designed for machining very large numbers of identical tubes one after another. It is fitted with automatic clamping inside the tube, a working feed that advances the tool by a set amount, and an automatic limit switch that returns the cutting tool to its start position for the next cycle. The machine raises productivity considerably by shortening the working cycle and removing possible operator error.