GBC Inflatable Pipe Leveling Systems
Inflatable Pipe Leveling Systems
Inflatable Pipe Leveling Systems
Twin Bag Filtering Systems
Dimensions: 2” - 48” (50mm – 1200mm)
GBC Twin Bag Disposal Systems, a spine tube and
two inflatable bags connected by a pressure valve
observed through light leakage from the source joint gap.
is positioned. The E-Z ZONE TAPE is used to bridge the weld gap.
and the cleaning gas flow can start up to 20 Ltr/min.
The bags swell, a seal is formed on both sides of the welding seam, and
The pressure valve releases gas into the welding chamber.
To continuously measure the oxygen content in the source room
The welder using the GBC Oxygen Monitor will know when to reduce the gas flow and when to start welding.
The system is left in the post-weld position until the source connection temperature drops below the oxidation levels, then the shielding gas supply is turned off, the bags are depressurized, and the system is retracted.
Heat-resistant and multisize bags are available upon request.
Versions with higher specifications, including gas supply systems instead of scratch-resistant backbone tubes and pressure relief valves, are available for more critical applications.
Request Offer
